Ubiquiti Nanostation 5AC Loco Setup & Configuration YouTube

Nanostation Loco M5 Configuration. Ubiquiti X 2 Units Bridge Kit Complete PreConfigured Launch your web browser and type https://192.168.1.20 in the address field Make sure that your host system is connected via Ethernet to the device

There are also Loco M2&M5's available for a bit less money/a bit less performance This mode will be ideal for connecting an intercom door station at one access point and then the room station at the other access point, or even a CCTV camera at one access point and the NVR at the other access point.

Ubiqiti Nanostation Loco M5 High Speed Data Link Setup YouTube

Note: For the NanoStationM2/M3/M5, two Cable Ties are provided. Verify connectivity in the airOS Configuration Interface Configure the Ethernet adapter on your host system with a static IP address on the 192.168.1.x subnet

Point To Point with Nano M5. It is capable of 24V Power over Ethernet output, which can provide power Verify connectivity in the airOS Configuration Interface

Ubiquiti NanoStation Loco M5 Preconfigured Wireless Bridge Kit. There are also Loco M2&M5's available for a bit less money/a bit less performance Page 1 101-732 - NanoStation Loco M5 - P2P Setup Guide Introduction This tech note will show you how to setup the 101-732 as a Point to Point network